Model
|
CPSC1450ICMC | CPSC82HMC |
---|---|---|
Engine | B&S XR1450 Professional Series | Honda GX240 |
HP | 10 | 7.9 |
Gross Torque (FT-LBS) | 14.5 | 13.5 |
Displacement CC’s | 306 | 270 |
Lubrication System | Splash | Splash |
Starting | Manual | Electric |
Transport | Push | Push |
Cutter Head | Patented Tongue & Groove System | Patented Tongue & Groove System |
Cutter Teeth | 9 Resharpenable Carbide Teeth | 9 Resharpenable Carbide Teeth |
Carbide Hits/Minute | 2500 | 2500 |
Cutter Head Stopping Time | 3 Seconds | 3 Seconds |
Wheel Brake | 6″ Disk & Caliper | 6″ Disk & Caliper |
Cutter Shaft Support | Cast Iron Ball Bearings | Cast Iron Ball Bearings |
Tires | 13″ Pneumatic | 13″ Pneumatic |
Length | 73″ or 88″ | 73″ or 88″ |
Width | 25″ | 25″ |
Height | 41″ | 41″ |
Machine Weight (LBS) | 250 | 250 |
Shipping Weight (LBS) | 325 | 325 |
Engine Warranty | 2 Year | 3 Year |
Machine Warranty | 2 Year Consumer
1 Year Commercial |
2 Year Consumer
1 Year Commercial |
Stump cutter stops in 3 seconds
Product Code:The Stump Cutter by MacKissic is compact and portable with a reversible handle bar for front or rear cutting. The Stump Cutter has an operator presence handle which when released will engage the braking system and stop the cutter head in less then 3 seconds. The frame is a uni-body construction with a kickstand that will protect the cutter head during storage and double as a guard while in use. The engine is protected by the front bumper which also provides a strong lifting handle and tie down for transportation.
The Stump Cutter features a patented cutter head. The cutter head is set thirty degrees off vertical to allow for smooth cutting of the stump rather then grinding the stump. The three different teeth, straight, 25 degrees, and 45 degrees, provide the smoothest cut available.
There is still easy access to the cutter head for quick sharpening or replacement.
The handle bars have a height adjustment to allow for differences in operators heights and size of the stump.
Made in the USA!