Cart 0

Concrete floor saw, 30" MK-3030V gas with Vanguard V-Twin

Product Code: 
  • $17,633.00 U.S. $



The MK-3000 series Concrete Saws are big performance saws in small packages. They have been engineered to take advantage of the new breed of high horsepower V-Twin air-cooled engines from Briggs and Stratton and Kohler. They provide the cutting depth and power of traditional street saws with all the advantages of a smaller, more maneuverable saw.

The Briggs & Stratton Vanguard 33Hp, air cooled, v-twin horizontal shaft engine is the industry proven standard for Big Block engine power, performance and reliability. Features include Dura-Bore cast iron cylinder sleeves and a high efficiency OHV head design for improved efficiency, smoother idle, lower emissions and more power. Magnetron electronic ignition provides dependable starts with no required maintenance.

MK-3000 Series Features:

  • Totally enclosed and sealed blade shaft with continuous oil bath lubrication system
  • Bayonet mount blade guard
  • Three position adjustable solid steel handlebars
  • Blade guard uses "ride on the blade" water tubes for superior water delivery and blade cooling
  • Dual arbor design for left or right side mounting of blade and blade guard
  • Rigid frame front pointer with high visibility guide wheel for accurate tracking
  • Instrumentation includes engine tach, fuel level and hour meter
  • Ergonomic FNR traverse control for ease of operation
  • Depth of cut indicator positioned for easy access
  • Blade guard has garden hose style connector for quick disconnecting
  • Removable rear panel for easy service
  • 7 3VX belts from engine to blade shaft
  • Electric leadscrew for positive adjustment of cutting depth
  • Wide front wheel base increases stability and allows ramp loading/unloading
  • Easy access emergency stop control
  • Water control level allows operator to adjust rate of water flow to blade guard
  • Venier throttle control for fast or fine adjustments
  • Meets EPA exhaust and emission standards
  • Eaton model 7 hydrostatic transmission coupled to a MK trans-axle
  • Built-in lifting bail for easy maneuverability
  • Travel speed 0-200 FPM forward, 0-100 FPM reverse
  • Neutral start switch to prevent starting with transmission in gear
  • Transmission can be disengaged from axle to allow saw to be pushed manually
  • Front-pivot
  • Made in U.S.A.
MK-3000 - Vanguard Engine
Model Blade Guard Part #
MK-3020V 20" 166447-20
MK-3026V 26" 166447-26
MK-3030V 30" 166447-30
Blade not included with saw.
Engine Specifications
Manufacturer Vanguard Kohler
Engine Vanguard V-Twin
Big Block OHV33
Kohler Command Pro
CH1000
Max Horse Power* 33 Hp 37 Hp
Displacement 60.6 cu in 61 cu in
Bore 3.366" 3.5"
Stroke 3.406" 3.1"
Cylinders / Cycle 2 Cylinders 4 Cycle 2 Cylinders 4 Cycle
Fuel Capacity 5 Gal. 5 Gal.
Oil Capacity 2.5 Qt. 2.9 Qt
Air Filter Three Stage Three Stage
Starter Electric Electric
Engine Cooling Air Air
General Specifications
Blade RPM 1,900
Depth of Cut - 20" Blade 7-1/2"
Depth of Cut - 26" Blade 10-1/2"
Depth of Cut - 30" Blade 12-1/2"
Arbor 1" with 3/8" Drive Pin
Fuel Capacity 6 gal
Travel Speed 0-200 FPM forward
0-100 FPM reverse
Starting System Electric
L x W x H 50" x 30-1/2" x 44"
L x W x H (mm) 1,270 x 775 x 1,118
Handle Extension 22" (599mm)
Weight 650 lbs.

 

Recommended Blades 
Cured Concrete
Hard Aggregate/Non-Abrasive MK-7501 
Cured Concrete
Medium-Hard Aggregate MK-7502 
Cured Concrete
Hard Aggregate MK-7503 
Green Concrete
Hard Aggregate MK-7601W 
Asphalt over Concrete
Asphalt Overlay MK-7625 
Asphalt
Soft Aggregate MK-7710W 

Weight: 650.0 lb
this item is part of these collections...


Related Products