U channel drive kit for GPD-45Product Code:
The kit includes a Multi-Pro Channel Post Chuck (301159) and Multi-Pro Channel Post
Anvil (301169). Combined these will allow the user to drive 1.2lbs per ft. channel post up
to 4lbs per ft. channel post. The stock chuck and lower body need to be removed then
the original anvil can be replaced with the Channel Post Anvil (301169) then reassemble
the unit. The longer anvil moves the point of impact below the slots in the chuck.
Channel post is used by many municipalities for signage and roadside reflectors. Carsonite flexible markers will fit into this chuck, however, until we have a drive cap for them it will be at the top of the Carsonite up and may not be acceptable.
post driver, PD-140 pneumatic heavy duty c/w 4 1/4 inch (107.9mm) master chuckplease contact us for pricing
post driver, PD-55 pneumatic medium duty c/w transport kit, 3 7/8 inch (98.4 mm) master chuckplease contact us for pricing
post driver, GPD-30 Ranch Pro Honda GX35, 1-3/4 inch ID c/w 1 inch adaptor & lock pin